miro
Edge

 

Quick Start Guide

1. What’s in the box

  • miro Edge gateway

  • LoRa Antenna

  • LTE Antenna (LTE version only)

  • USB charger and cable (indoor version only)

2. Connectors and LEDs

2.1. Indoor version

Connectors and Interfaces indoor

1 LoRa antenna

2 Reset button

3 LED WWAN: Information about the mobile LTE/4G/3G network connection

4 LED WLAN: Information about the WiFi connection

5 LED LoRa: Information about the connection from LoRa to the Internet

6 LED PWR: Solid green if powered on.

7 Power input, USB micro

8 USB connector for additional devices

9 Ethernet / Power

10 External LTE antenna

2.2. Outdoor version

Connectors and Interfaces outdoor

1 Air pressure compensation

2 Power Indicator

3 Power Connector (optional)

4 Ethernet Connector (optional)

5 LTE antenna (optional)

6 LoRa antenna

3. LED status information

3.1. Indoor version

LED Description solid flashing off

LTE/WWAN

mobile network available

connected

data transmit

not available

WLAN

WiFi activity

Transmission activity

off

LoRa

LoRa connectivity

connected

connection not established

PWR

Power supply

device is powered

device not powered

The gateway is running properly if:

  • PWR LED is solid green

  • LoRa LED is solid green

The other LEDs just give more detailed information.

3.2. Outdoor version

Power LED is solid green after power on.

4. Installing the gateway

  • LTE variant: Supply the gateway over the micro USB cable. Use the provided USB cable and charger.

  • PoE variant: Connect the gateway to your local network (needs PoE capable Port).

5. Configure your gateway

  • Check the Configure Section to configure your gateway

  • Make sure the gateway has the right LoRa Network Server configuration

  • Make sure the gateway has the right APN (mobile Network) configuration

6. Register your gateway on the LoRa Network Server (LNS)

  • Check the Configuration Section